Top Ways to Get Rid of Your Car's Dents
No one likes car dents. Not only are they unsightly, but they can also be a pain to get rid of. If you’re looking for ways to get rid of your car’s dents, you’ve come to the right place! In this blog post, you will learn about the best methods that you can use to remove those pesky dents from your car.
The Plunger Method
One of the most popular ways to remove these issues is by using the plunger method, which is often suggested by the best car experts. You can easily find out more from them here and see how effective this plunger method is. If you have a plunger at home, then this should be your go-to option when trying to fix your car’s dents.
All you need to do is place the plunger over the affected area and push and pull it up and down vigorously. Continue doing this until the plunger pops out of the dent. You may need to repeat this process a few times to completely remove the dent.
While this method is relatively easy, it does require some elbow grease on your part. However, if you’re up for the challenge, then give it a try! You may be surprised at how well it works.
Hot Water
Many people use boiling water to remove dents from their cars. This method works best on smaller dents, as well as dents that are closer to the surface of the car. Boil a pot of water and pour it over the area of the dent. Reach behind and pop the dent out. Pour a pot of cold water over the area to cool and fix the plastic area.
Another hot water method is to fill a spray bottle with hot water and direct the stream onto the surface of the dent. Apply pressure to the back of the dent with your hand and continue spraying until the dent pops out.
Just be careful not to burn yourself! Hot water can cause serious burns so protect yourself with gloves and be careful not to splash hot water on yourself. These hot water methods may not work on all dents and may cause further damage to your car so use them at your own risk.
Hammering Out The Dent
Now, here’s an effective, but a little bit risky method of fixing dents. In order to do it properly, follow these steps:
- Parking your car in a safe place, and make sure that the area you’re working in is clear of any obstructions
- Locate the dent on your car and identify its weakest point
- Using a hammer or any other object that can create force, hit the dent from its weakest point until it pops out. Be careful not to hit the painted surface.
- If the dent pops out, proceed to the next step. If not, try hitting it from another angle or use a bigger hammer.
- Once the dent is gone, inspect the area for any scratches or paint chips and touch them up with car paint if necessary.
Dry Ice Pop
Using dry ice to remove car dents is a popular method. The dry ice will cause the metal to contract and the dent will pop out. Make sure to wear gloves when handling dry ice, as it can cause skin irritation. Wrap the dry ice in a towel before using it on the car. Hold the dry ice against the dent and wait for it to start popping out.
Hot Glue Method
Many mechanics also suggest the hot glue method. It is a popular way to remove smaller dents from cars. All you need is a hairdryer and a can of hot glue. Simply heat up the dent with the hairdryer for about two minutes. Next, apply the hot glue around the circumference of the dent.
Once the glue has cooled and hardened, simply peel it off. You may need to use a putty knife to help pry it off if the dent is particularly stubborn. Be sure not to use too much force, as you don’t want to damage your car’s paint job. If all else fails, you can always take your car to a professional auto body shop for repairs.
Hairdryer Method
Not all car insurance policies will cover smaller dents, which is why there’s an easy method to use a hairdryer to remove the dent. All you need is a hairdryer, some water, and a bucket or container to hold the water
The first step is to fill the bucket with hot water and submerge the dented area of the car in it. Then, take the hairdryer and set it on full blast heat. Hold the hairdryer approximately six inches away from the wet surface of the car and move it around in a circular pattern.
Image by Toby Parsons from Pixabay
Dents can be really annoying but it’s not too hard to remove them. Use a plunger and hot water for starters as they’re the most common methods. Many people use a hammer, but you do need to be super careful. Dry ice or hot glue are also fantastic ways, while hairdryers can fix small problems. If you don’t know how to do this, bring it to the shop!
Featured Image by Hans Braxmeier from Pixabay
